ttk::entry(n) Tk Themed Widget ttk::entry(n) 







ttk::entry - Editable text field widget








ttk::entry pathName ?options?










An ttk::entry widget displays a one-line text string and
    allows that string to be edited by the user. The value of the string may be
    linked to a Tcl variable with the -textvariable option. Entry widgets
    support horizontal scrolling with the standard -xscrollcommand option
    and xview widget command.








-class	-cursor	-style
-takefocus	-xscrollcommand


See the ttk_widget manual entry for details on the standard
    options.








[-exportselection
    exportSelection] A boolean value specifying whether or not a
    selection in the widget should be linked to the X selection. If the
    selection is exported, then selecting in the widget deselects the current X
    selection, selecting outside the widget deselects any widget selection, and
    the widget will respond to selection retrieval requests when it has a
    selection. [-invalidcommand
    invalidCommand] A script template to evaluate whenever the
    validateCommand returns 0. See VALIDATION below for more
    information. [-justify justify]
    Specifies how the text is aligned within the entry widget. One of
    left, center, or right. [-show
    show] If this option is specified, then the true contents of
    the entry are not displayed in the window. Instead, each character in the
    entry's value will be displayed as the first character in the value of this
    option, such as “*” or a bullet. This is useful, for example,
    if the entry is to be used to enter a password. If characters in the entry
    are selected and copied elsewhere, the information copied will be what is
    displayed, not the true contents of the entry.
    [-state state] Compatibility option;
    see ttk::widget(n) for details. Specifies one of three states for the
    entry, normal, disabled, or readonly. See WIDGET
    STATES, below. [-textvariable
    textVariable] Specifies the name of a variable whose value is
    linked to the entry widget's contents. Whenever the variable changes value,
    the widget's contents are updated, and vice versa.
    [-validate validate] Specifies the
    mode in which validation should operate: none, focus,
    focusin, focusout, key, or all. Default is
    none, meaning that validation is disabled. See VALIDATION
    below. [-validatecommand
    validateCommand] A script template to evaluate whenever
    validation is triggered. If set to the empty string (the default),
    validation is disabled. The script must return a boolean value. See
    VALIDATION below. [-width
    width] Specifies an integer value indicating the desired width
    of the entry window, in average-size characters of the widget's font.








A portion of the entry may be selected as described below. If an
    entry is exporting its selection (see the exportSelection option),
    then it will observe the standard X11 protocols for handling the selection;
    entry selections are available as type STRING. Entries also observe
    the standard Tk rules for dealing with the input focus. When an entry has
    the input focus it displays an insert cursor to indicate where new
    characters will be inserted.


Entries are capable of displaying strings that are too long to fit
    entirely within the widget's window. In this case, only a portion of the
    string will be displayed; commands described below may be used to change the
    view in the window. Entries use the standard xScrollCommand mechanism
    for interacting with scrollbars (see the description of the
    xScrollCommand option for details).








Many of the entry widget commands take one or more indices
    as arguments. An index specifies a particular character in the entry's
    string, in any of the following ways:



  

  
Specifies the character as a numerical index, where 0 corresponds to the
      first character in the string.

  
@number

  
In this form, number is treated as an x-coordinate in the entry's
      window; the character spanning that x-coordinate is used. For example,
      “@0” indicates the left-most character in the
    window.

  

  
Indicates the character just after the last one in the entry's string.
      This is equivalent to specifying a numerical index equal to the length of
      the entry's string.

  

  
Indicates the character adjacent to and immediately following the insert
      cursor.

  

  
Indicates the first character in the selection. It is an error to use this
      form if the selection is not in the entry window.

  

  
Indicates the character just after the last one in the selection. It is an
      error to use this form if the selection is not in the entry window.




Abbreviations may be used for any of the forms above, e.g.
    “e” or “sel.l”. In general,
    out-of-range indices are automatically rounded to the nearest legal
  value.








The following subcommands are possible for entry widgets:



  

  
Returns a list of four numbers describing the bounding box of the
      character given by index. The first two elements of the list give
      the x and y coordinates of the upper-left corner of the screen area
      covered by the character (in pixels relative to the widget) and the last
      two elements give the width and height of the character, in pixels. The
      bounding box may refer to a region outside the visible area of the
    window.

  

  
Delete one or more elements of the entry. First is the index of the
      first character to delete, and last is the index of the character
      just after the last one to delete. If last is not specified it
      defaults to first+1, i.e. a single character is deleted. This
      command returns the empty string.

  

  
Returns the entry's string.

  

  
Arrange for the insert cursor to be displayed just before the character
      given by index. Returns the empty string.

  

  
Returns the numerical index corresponding to index.

  

  
Insert string just before the character indicated by index.
      Returns the empty string.

  

  
This command is used to adjust the selection within an entry. It has
      several forms, depending on option:







  

  
Clear the selection if it is currently in this widget. If the selection is
      not in this widget then the command has no effect. Returns the empty
      string.

  

  
Returns 1 if there is are characters selected in the entry, 0 if nothing
      is selected.

  

  
Sets the selection to include the characters starting with the one indexed
      by start and ending with the one just before end. If
      end refers to the same character as start or an earlier one,
      then the entry's selection is cleared.







  

  
Force revalidation, independent of the conditions specified by the
      -validate option. Returns 0 if validation fails, 1 if it succeeds.
      Sets or clears the invalid state accordingly. See VALIDATION
      below for more details.

  

  
This command is used to query and change the horizontal position of the
      text in the widget's window. It can take any of the following forms:







  

  
Returns a list containing two elements. Each element is a real fraction
      between 0 and 1; together they describe the horizontal span that is
      visible in the window. For example, if the first element is .2 and the
      second element is .6, 20% of the entry's text is off-screen to the left,
      the middle 40% is visible in the window, and 40% of the text is off-screen
      to the right. These are the same values passed to scrollbars via the
      -xscrollcommand option.

  

  
Adjusts the view in the window so that the character given by index
      is displayed at the left edge of the window.

  

  
Adjusts the view in the window so that the character fraction of
      the way through the text appears at the left edge of the window.
      Fraction must be a fraction between 0 and 1.

  

  
This command shifts the view in the window left or right according to
      number and what. Number must be an integer.
      What must be either units or pages. If what is
      units, the view adjusts left or right by number
      average-width characters on the display; if it is pages then the
      view adjusts by number screenfuls. If number is negative
      then characters farther to the left become visible; if it is positive then
      characters farther to the right become visible.






The entry widget also supports the following generic
    ttk::widget widget subcommands (see ttk::widget(n) for
    details):




cget	configure	identify
instate	state












The -validate, -validatecommand, and
    -invalidcommand options are used to enable entry widget
  validation.






There are two main validation modes: prevalidation, in
    which the -validatecommand is evaluated prior to each edit and the
    return value is used to determine whether to accept or reject the change;
    and revalidation, in which the -validatecommand is evaluated
    to determine whether the current value is valid.


The -validate option determines when validation occurs; it
    may be set to any of the following values:





  

  
Default. This means validation will only occur when specifically requested
      by the validate widget command.

  

  
The entry will be prevalidated prior to each edit (specifically, whenever
      the insert or delete widget commands are called). If
      prevalidation fails, the edit is rejected.

  

  
The entry is revalidated when the entry receives or loses focus.

  

  
The entry is revalidated when the entry receives focus.

  

  
The entry is revalidated when the entry loses focus.

  

  
Validation is performed for all above conditions.






The -invalidcommand is evaluated whenever the
    -validatecommand returns a false value.


The -validatecommand and -invalidcommand may modify
    the entry widget's value via the widget insert or delete
    commands, or by setting the linked -textvariable. If either does so
    during prevalidation, then the edit is rejected regardless of the value
    returned by the -validatecommand.


If -validatecommand is empty (the default), validation
    always succeeds.








It is possible to perform percent substitutions on the
    -validatecommand and -invalidcommand, just as in a bind
    script. The following substitutions are recognized:





  
%d

  
Type of action: 1 for insert prevalidation, 0 for delete
      prevalidation, or -1 for revalidation.

  
%i

  
Index of character string to be inserted/deleted, if any, otherwise
    -1.

  
%P

  
In prevalidation, the new value of the entry if the edit is accepted. In
      revalidation, the current value of the entry.

  
%s

  
The current value of entry prior to editing.

  
%S

  
The text string being inserted/deleted, if any, {} otherwise.

  
%v

  
The current value of the -validate option.

  
%V

  
The validation condition that triggered the callback (key,
      focusin, focusout, or forced).

  
%W

  
The name of the entry widget.












The standard Tk entry widget automatically disables validation (by
    setting -validate to none) if the -validatecommand or
    -invalidcommand modifies the entry's value. The Tk themed entry
    widget only disables validation if one of the validation scripts raises an
    error, or if -validatecommand does not return a valid boolean value.
    (Thus, it is not necessary to re-enable validation after modifying the entry
    value in a validation script).


In addition, the standard entry widget invokes validation whenever
    the linked -textvariable is modified; the Tk themed entry widget does
    not.










The entry widget's default bindings enable the following behavior.
    In the descriptions below, “word” refers to a contiguous group
    of letters, digits, or “_” characters, or any single character
    other than these.



  
 •

  
Clicking mouse button 1 positions the insert cursor just before the
      character underneath the mouse cursor, sets the input focus to this
      widget, and clears any selection in the widget. Dragging with mouse button
      1 down strokes out a selection between the insert cursor and the character
      under the mouse.

  
 •

  
Double-clicking with mouse button 1 selects the word under the mouse and
      positions the insert cursor at the end of the word. Dragging after a
      double click strokes out a selection consisting of whole words.

  
 •

  
Triple-clicking with mouse button 1 selects all of the text in the entry
      and positions the insert cursor at the end of the line.

  
 •

  
The ends of the selection can be adjusted by dragging with mouse button 1
      while the Shift key is down. If the button is double-clicked before
      dragging then the selection will be adjusted in units of whole words.

  
 •

  
Clicking mouse button 1 with the Control key down will position the insert
      cursor in the entry without affecting the selection.

  
 •

  
If any normal printing characters are typed in an entry, they are inserted
      at the point of the insert cursor.

  
 •

  
The view in the entry can be adjusted by dragging with mouse button 2. If
      mouse button 2 is clicked without moving the mouse, the selection is
      copied into the entry at the position of the mouse cursor.

  
 •

  
If the mouse is dragged out of the entry on the left or right sides while
      button 1 is pressed, the entry will automatically scroll to make more text
      visible (if there is more text off-screen on the side where the mouse left
      the window).

  
 •

  
The Left and Right keys move the insert cursor one character to the left
      or right; they also clear any selection in the entry. If Left or Right is
      typed with the Shift key down, then the insertion cursor moves and the
      selection is extended to include the new character. Control-Left and
      Control-Right move the insert cursor by words, and Control-Shift-Left and
      Control-Shift-Right move the insert cursor by words and also extend the
      selection. Control-b and Control-f behave the same as Left and Right,
      respectively.

  
 •

  
The Home key and Control-a move the insert cursor to the beginning of the
      entry and clear any selection in the entry. Shift-Home moves the insert
      cursor to the beginning of the entry and extends the selection to that
      point.

  
 •

  
The End key and Control-e move the insert cursor to the end of the entry
      and clear any selection in the entry. Shift-End moves the cursor to the
      end and extends the selection to that point.

  
 •

  
Control-/ selects all the text in the entry.

  
 •

  
Control-\ clears any selection in the entry.

  
 •

  
The standard Tk <<Cut>>, <<Copy>>,
      <<Paste>>, and <<Clear>> virtual events operate on
      the selection in the expected manner.

  
 •

  
The Delete key deletes the selection, if there is one in the entry. If
      there is no selection, it deletes the character to the right of the insert
      cursor.

  
 •

  
The BackSpace key and Control-h delete the selection, if there is one in
      the entry. If there is no selection, it deletes the character to the left
      of the insert cursor.

  
 •

  
Control-d deletes the character to the right of the insert cursor.

  
 •

  
Control-k deletes all the characters to the right of the insertion
    cursor.










In the disabled state, the entry cannot be edited and the
    text cannot be selected. In the readonly state, no insert cursor is
    displayed and the entry cannot be edited (specifically: the insert
    and delete commands have no effect). The disabled state is the
    same as readonly, and in addition text cannot be selected.


Note that changes to the linked -textvariable will still be
    reflected in the entry, even if it is disabled or readonly.


Typically, the text is “grayed-out” in the
    disabled state, and a different background is used in the
    readonly state.


The entry widget sets the invalid state if revalidation
    fails, and clears it whenever validation succeeds.








ttk::widget(n), entry(n)








entry, widget, text field







  

    8.5
    Tk