| XSLoader(3pm) | Perl Programmers Reference Guide | XSLoader(3pm) |
XSLoader - Dynamically load C libraries into Perl code
Version 0.30
package YourPackage;
require XSLoader;
XSLoader::load(__PACKAGE__, $VERSION);
This module defines a standard simplified interface to the dynamic linking mechanisms available on many platforms. Its primary purpose is to implement cheap automatic dynamic loading of Perl modules.
For a more complicated interface, see DynaLoader. Many (most) features of "DynaLoader" are not implemented in "XSLoader", like for example the "dl_load_flags", not honored by "XSLoader".
A typical module using DynaLoader starts like this:
package YourPackage;
require DynaLoader;
our @ISA = qw( OnePackage OtherPackage DynaLoader );
our $VERSION = '0.01';
__PACKAGE__->bootstrap($VERSION);
Change this to
package YourPackage;
use XSLoader;
our @ISA = qw( OnePackage OtherPackage );
our $VERSION = '0.01';
XSLoader::load(__PACKAGE__, $VERSION);
In other words: replace "require DynaLoader" by "use XSLoader", remove "DynaLoader" from @ISA, change "bootstrap" by "XSLoader::load". Do not forget to quote the name of your package on the "XSLoader::load" line, and add comma (",") before the arguments ($VERSION above).
Of course, if @ISA contained only "DynaLoader", there is no need to have the @ISA assignment at all; moreover, if instead of "our" one uses the more backward-compatible
use vars qw($VERSION @ISA);
one can remove this reference to @ISA together with the @ISA assignment.
If no $VERSION was specified on the "bootstrap" line, the last line becomes
XSLoader::load(__PACKAGE__);
in which case it can be further simplified to
XSLoader::load();
as "load" will use "caller" to determine the package.
If you want to have your cake and eat it too, you need a more complicated boilerplate.
package YourPackage;
our @ISA = qw( OnePackage OtherPackage );
our $VERSION = '0.01';
eval {
require XSLoader;
XSLoader::load(__PACKAGE__, $VERSION);
1;
} or do {
require DynaLoader;
push @ISA, 'DynaLoader';
__PACKAGE__->bootstrap($VERSION);
};
The parentheses about "XSLoader::load()" arguments are needed since we replaced "use XSLoader" by "require", so the compiler does not know that a function "XSLoader::load()" is present.
This boilerplate uses the low-overhead "XSLoader" if present; if used with an antique Perl which has no "XSLoader", it falls back to using "DynaLoader".
Skip this section if the XSUB functions are supposed to be called from other modules only; read it only if you call your XSUBs from the code in your module, or have a "BOOT:" section in your XS file (see "The BOOT: Keyword" in perlxs). What is described here is equally applicable to the DynaLoader interface.
A sufficiently complicated module using XS would have both Perl code (defined in YourPackage.pm) and XS code (defined in YourPackage.xs). If this Perl code makes calls into this XS code, and/or this XS code makes calls to the Perl code, one should be careful with the order of initialization.
The call to "XSLoader::load()" (or "bootstrap()") calls the module's bootstrap code. For modules build by xsubpp (nearly all modules) this has three side effects:
Consequently, if the code in the .pm file makes calls to these XSUBs, it is convenient to have XSUBs installed before the Perl code is defined; for example, this makes prototypes for XSUBs visible to this Perl code. Alternatively, if the "BOOT:" section makes calls to Perl functions (or uses Perl variables) defined in the .pm file, they must be defined prior to the call to "XSLoader::load()" (or "bootstrap()").
The first situation being much more frequent, it makes sense to rewrite the boilerplate as
package YourPackage;
use XSLoader;
our ($VERSION, @ISA);
BEGIN {
@ISA = qw( OnePackage OtherPackage );
$VERSION = '0.01';
# Put Perl code used in the BOOT: section here
XSLoader::load(__PACKAGE__, $VERSION);
}
# Put Perl code making calls into XSUBs here
If the interdependence of your "BOOT:" section and Perl code is more complicated than this (e.g., the "BOOT:" section makes calls to Perl functions which make calls to XSUBs with prototypes), get rid of the "BOOT:" section altogether. Replace it with a function "onBOOT()", and call it like this:
package YourPackage;
use XSLoader;
our ($VERSION, @ISA);
BEGIN {
@ISA = qw( OnePackage OtherPackage );
$VERSION = '0.01';
XSLoader::load(__PACKAGE__, $VERSION);
}
# Put Perl code used in onBOOT() function here; calls to XSUBs are
# prototype-checked.
onBOOT;
# Put Perl initialization code assuming that XS is initialized here
To reduce the overhead as much as possible, only one possible location is checked to find the extension DLL (this location is where "make install" would put the DLL). If not found, the search for the DLL is transparently delegated to "DynaLoader", which looks for the DLL along the @INC list.
In particular, this is applicable to the structure of @INC used for testing not-yet-installed extensions. This means that running uninstalled extensions may have much more overhead than running the same extensions after "make install".
The new simpler way to call "XSLoader::load()" with no arguments at all does not work on Perl 5.8.4 and 5.8.5.
Please report any bugs or feature requests via the perlbug(1) utility.
DynaLoader
Ilya Zakharevich originally extracted "XSLoader" from "DynaLoader".
CPAN version is currently maintained by Sebastien Aperghis-Tramoni <sebastien@aperghis.net>.
Previous maintainer was Michael G Schwern <schwern@pobox.com>.
Copyright (C) 1990-2011 by Larry Wall and others.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
| 2024-11-10 | perl v5.34.1 |